Conductor (rail)

src: www.railtechnologymagazine.com

A conductor (American and Canadian English) or guard (Commonwealth English) is a train crew member responsible for operational and safety duties that do not involve actual operation of the train. The conductor title is most common in North American railway operations, but the role is common worldwide under various job titles. In Commonwealth English, a conductor is also known as guard or train manager.

The responsibilities of a conductor in North America and of a guard in Commonwealth English typically include the following:

Making sure the train stays on schedule
Ensuring that any cars and cargo are picked up and dropped off properly
Completing en-route paperwork
Ensuring the train follows applicable safety rules and practices
Controlling the train's movement while operating in reverse
Coupling or uncoupling cars
Assisting with setting out or picking up of rolling stock
Carrying out running repairs
Ticket collection and other customer service duties
Opening and closing train doors

Some rapid transit systems employ conductors to make announcements and open and close doors--as opposed to a train operator performing those duties. The conductor often stays in the center of the train where they can best view the platform. While advances in automation allow most transit systems to use one person train operation (OPTO), a few, such as the New York City Subway, Toronto Transit Commission and Sydney Trains continue to employ conductors.

Conductor is also a crew member in some bus, trolleybus or tram operations.

Video Conductor (rail)

Conductors in North America

In North America, the conductor manages a freight, passenger, or other types of train, and directly supervises the train crew, which can include a brakeman, flagman, ticket collector, assistant conductor, and on board service personnel. All crew members work under the conductor. The conductor, engineer, and additional engine crew members (fireman, pilot engineer) share responsibility for safe and efficient train operation and adherence to railway rules and procedures. On some railroads, union contracts specify that conductors must progress to engineer.

Other conductors duties include:

Jointly coordinate with the engineer and dispatcher the train's movement authority, and verifying this authority is not exceeded
Communicate and coordinating with other parties--yardmasters, trainmasters, dispatchers, on board service personnel, etc.
Be alert to wayside signals, switch position, and other conditions that affect safe train movement
Mechanically inspect rolling stock
Assist the engineer in testing the train's air brakes
Signal the engineer when to start or stop moving
Keep a log of the journey
Check tickets and collect fares on passenger trains
Attend to passenger needs
Keep records of consignment notes and waybills
Direct, coordinate, and usually manually perform, shunting or switching

Passenger trains may employ one or more assistant conductors who assist the conductor and engineer in the safe and prompt movement of the train, to share the workload, and accept delegated responsibility. If a train crew's route, or tour of duty, exceeds a single shift, or conflicts with a legal or contractual limit on the number of work hours, more than one crew may be assigned, each with its own conductor. Onboard service crew members on passenger trains normally remain on duty for the entire run, including assigned meal and sleep breaks.

Since nearly the beginning of railroading in North America, the conductor on freight trains rode aboard a caboose, along with the rear flagman and the rear brakeman, and performed duties from there. Advances in technology and pressure to reduce operating costs made cabooses redundant, and in most cases they have been eliminated. This relocated the conductor from the rear of the train to the locomotive (or locomotives) at the head of the train. In most cases, these same conditions gradually eliminated members of the train crew under the conductor--head and rear brakemen, flagmen, and others.

Most freight trains on most railroads today have a crew of two: one conductor and one engineer. Railroad companies continue to press for reduced operating and labor costs and this threatens to eliminate conductors. Railroads rationalize that since the engineer is already qualified as a conductor, he can easily assume the duties of a conductor. In fact, on most railroads, engineers begin as brakemen/assistant conductors, then become conductors, and finally engineers. Some railroads already implement such a strategy, notably the Montana Rail Link, and operate with an engineer, and an assistant engineer. However, most railroads are contractually obligated to employ at least one conductor in addition to the engineer, via crew consist agreements negotiated with the major rail unions, primarily the United Transportation Union (UTU). Therefore, eliminating the conductor position would require that the railroads and unions negotiate a new agreement. If the railroads were successful, conductors already trained and certified as engineers would be able to work as engineers. Those that have not yet progressed to engineer would have to be trained as engineers as positions became available. Others would have to accept other positions or possibly lose their jobs. The primary union for engineers, the Brotherhood of Locomotive Engineers does not support this movement, claiming that requiring its members to operate trains alone would be unsafe. The conductors' union, the United Transportation Union, also opposes this initiative, despite historical differences with the engineers' union.

Remote control locomotives

By the late 1990s, remote control locomotives were increasingly popular on North American railroads for switching duties in rail yards. This system allows the conductor to directly control the locomotive(s) via a wireless remote unit, as opposed to radioing commands to an engineer in the cab. Some Class I Rail Yards utilize RCO packs for their conductors, while others do not, depending on the size and type of Yard. Class I Railroads train conductors on the use of RCO packs with classroom and hands-on instruction, culminating with on-the-job training and certification as a RCO operator. Currently, Class I railroads such as Norfolk Southern require RCO qualified conductors to work from job boards that perform RCO operations exclusively (when in a yard that utilizes RCO switching). This ensures the extra training and pay these conductors receive will provide the company with maximum value for the investment.

Train hosts

As there is no explicit Federal requirement for a two-person train crew in the United States, the Utah Transit Authority originally planned their FrontRunner service to be operated by an operator only, with revenue collected by a proof-of-payment system. Before operation began, the FRA required FrontRunner to employ a second crewmember on each train to assist with emergency evacuation, disabled access, and other safety-sensitive situations. FrontRunner classified this job as a train host, with a focus on customer service rather than railroad operations. Some other services, such as Amtrak's Downeaster, also use train hosts (paid or volunteer) to assist the conductor with non-revenue-related customer service duties.

Maps Conductor (rail)

Train guard (United Kingdom, Australia, and New Zealand)

In the UK, Australia and New Zealand, the person with ultimate responsibility for operation of a train is usually called the guard, a term that derives from stagecoach days.

Until the latter part of the 20th century, guards on passenger trains in these countries did not have routine responsibilities for ticket inspection or sale. Their jobs focused more on safe operation of their trains, timekeeping, handling parcels, and other consignments. A dedicated 'travelling ticket inspector' handled fare duties. In recent years, passenger train guards have been assigned more responsibility for on-train revenue collection and ticket inspection.

As well as ticketing and customer care, guards must be trained in "emergency protection" duties, should an emergency arise, along with other operational roles. This involves using emergency kit such as detonators, track circuit clips and flags to prevent other trains colliding with, for example a derailed train. If in a crash the driver became incapacitated, the guard is the only person left who can protect the train. Other day-to-day duties include operating the public address system and train doors.

United Kingdom

Under British Railways, there were several grades of guard, depending on whether the guard worked on freight or passenger trains--and a purely operational guard grade worked freight and passenger trains without customer contact. When the guard has significant customer contact, the position is usually classified as conductor-guard or conductor. Since British Rail, there have been a number of titles for a guard's grade but, with a few exceptions, all now perform some sort of customer-facing role.

On long-distance expresses, the conductor's title is sometimes enhanced to senior conductor, in line with the implied prestige of operating these trains. Historically, under British Rail, long distance intercity trains were normally worked by the most senior guards at the depot, hence the name senior conductor. Several more recent private UK passenger train operators have further renamed the senior conductor's passenger facing title to "train manager".

In the UK, technological improvements and economic pressure have made some trains lose their guards and become driver-only operated (DOO). British Rail first brought this in on some commuter services in London and Glasgow, as well as on almost all non-passenger trains. In 2003, a controversial amendment to the UK operational rule book moved part of the guard's safety and operational role to the driver. With rail service privatisation, train operating companies (TOC) attempted to bring in DOO to other network areas--c2c operating from London Fenchurch Street is an example of this. Pressure after several fatal train crashes reversed this trend to the point that some TOCs have restored guards to services previously stripped of them, First Great Western did this to certain services it acquired when it took over operation of Thames Trains. Currently, several titles describe a guard: train manager, train host, conductor, and South West Trains and Merseyrail still use the term guard. The role of the guard is set out by a mixture of the Railway Rule Book and train operating companies.

Australia

In Australia, there is today a mixture of driver-only operated trains and trains with a guard depending largely on state-based railway legislation.

New South Wales

All passenger trains in New South Wales operate with a driver and guard. Guards were removed from freight trains in the 1980s, but these still operate with a two-man locomotive crew.

Greater Sydney area

Sydney Trains--which operates all metropolitan trains--and NSW TrainLink intercity trains have a train guard. The guard is ultimately responsible for the safety of all passengers on the train. They control the operation of doors and Public Address, perform platform duties, provide basic customer service, operate the train to timetable and accept and deliver internal mail. On Sydney Trains, the guard is normally located in the middle of the train, but on the newer Waratah trains, and on NSW TrainLink intercity services they normally work from the rear. The guard is not responsible for inspecting tickets - this role is performed by Transport Officers and NSW Police.

Regional trains

On NSW TrainLink regional Xplorer and XPT services the train guard is known as a Passenger Service Supervisor (PSS). While still responsible for the safety of passengers, the PSS is also in charge of delivering customer service and a number of value-add functions on the train including ticket inspections and manning the cafe alongside Passenger Attendants. On Xplorer trains, the driver operates the doors when the PSS gives clearance to depart. On XPT trains, the PSS performs the platform duties of a guard in conjunction with the driver.

Queensland

Passenger trains are operated by Queensland Rail, and all operate with both driver and guard for suburban passenger services, or Passenger Services Supervisor for long distance passenger services.

Victoria

Trains in metropolitan Melbourne have been driver-only since the early 1990s. When the city's rail franchise was offered to the current operator, Metro Trains Melbourne, a proposal existed to reinstate guards on some peak train services, however this option was spurned in favour of hiring additional platform staff.

Regional trains operated by V/Line are operated by a driver and conductor. The conductor performs platform duties and--on locomotive-hauled trains--operates the train doors. They are responsible for passenger safety and also perform ticket inspection duties.

South Australia

Adelaide Metro's metropolitan rail network is configured for driver-only operation, but also operate with Passenger Service Assistants (PSA). This is safety role, but with a focus on customer service and revenue protection. Normally, the train driver operates the doors, but PSAs are also able to.

Western Australia

TransPerth trains are all driver-only operated.

New Zealand

In New Zealand, inner-city commuter rail networks are staffed by a driver and a train manager (guard) as a minimum.

In Wellington, where ticketing is still paper-based, each train has between one and three passenger operators (ticket collectors). The exact number of passenger operators depends on how many multiple units or carriages make up the train. In Auckland, off-board ticketing and smartcard systems have reduced the staff level to driver and train manager only. Auckland train managers are now not responsible for revenue on trains, as Revenue Protection officers carry out these roles.

Enclosed conductor rail - VAHLE Enclosed Conductor Systems - Paul ...

src: img.directindustry.com

Conductors/guards in Europe

Switzerland

In general, conductors in Switzerland collect or punch tickets, fine people the first charge of 100 CHF for not having a valid fare, and make announcements on the public address system. They also may fine passengers if they take a longer trip than normal. For example, if one takes a train to Bern via Biel, having departed from Geneva, which is a longer trip than taking the InterCity via Lausanne, the conductor can fine the passenger a supplementary fare. They sound a warning when the train's doors are going to close. Many conductors, especially those on night shift and on isolated regional lines, are being trained in self-defence against would-be assailants.

Netherlands/Belgium

In Belgium and The Netherlands, train conductors have multiple tasks involving train safety and customer services. Belgian/Dutch train conductors are responsible for the departure of the train. In each station they give the permission to move on by giving a ready signal to the train driver. Therefore, train conductors in Belgium and The Netherlands always close (and in some scenarios also open) the doors. They are also responsible for performing safety tasks in case of an emergency or accident, such as fire, evacuation, etc. Because of these tasks, there has to be at least one conductor on each passenger train; a train without a conductor is uncommon, but still appears on some regional Dutch trains. The departure trains always have one conductor who is conductor-in-chief. He is responsible for the entire train, the on-board crew and the passengers. Some longer trains may have additional conductors who are under command of the conductor-in-chief. Besides the safety tasks, conductors also collect and punch tickets, fine people for not having a valid fare and make announcements to the passengers.

Hungary

In Hungary a conductor may assist the train driver in testing the train's air brakes, and sometimes they have to lead the shunting, mostly when the trains are switching lines. Hungarian train conductors are responsible for the departure of the trains. In each station they give the permission to move on by giving a ready signal to the train driver. During the day they use a disc (which is white and has a green border) to give the ready signal to the train driver.

After sunset they give signals with flashlights. Train drivers are not allowed to move the train without the conductor in chief giving them the ready signal. Conductors, along with train drivers, are responsible for keeping the trains on schedule. There is always at least one conductor in chief on passenger trains in Hungary. No passenger trains may depart without one, as only they have the right to give the departure signal.

Some longer trains may have additional conductors who are under the command of the conductor in chief. If there is more than one conductor on a train, then the signal procedure is as follows:

After all passengers have left or entered the train and the departure time has arrived, the conductor in chief asks the other conductor for his ready signal. If it is safe to depart he gives a ready signal to the conductor in chief who then gives the same signal to the train driver.

As in Belgium and in the Netherlands conductors also collect and punch tickets, fine people for not having a valid fare and make announcements to the passengers. They also sell tickets on the trains; if the passengers have entered the train at a station where a ticket office is operating they can buy a ticket only with payment of a fine. However, if the passengers got on at a station or stop where they didn't have an option to buy a ticket, they can buy from the conductor without having to pay a fine.

Railway Track Conductor Rail Running Rail Stock Photo 553540414 ...

src: image.shutterstock.com

Railway guards in Asia

India

In India guards are posted on all passenger trains and goods trains and no passenger-carrying train is allowed to move without a guard. The passenger train guard, generally called a mail guard, is completely responsible for the train, its schedule, and safety of passengers and the locomotive pilot. These guards wear a specific uniform (generally white).

During the day, the guard uses the traditional green flag to signal the pilot to depart, and the red flag to stop, assisted by two-way radios. After sunset, the guard uses lamp signals in place of the flags. A couple of minutes before signalling departure to the pilot, the guard blows a whistle to warn passengers to board the train. After ensuring all passengers are safe to travel, the guard signals the green flag by waving it from the brake van. In an emergency, the guard uses the red flag to indicate a stop, and may directly apply brakes to stop the train. The pilot is not allowed to move the train without a signal from the guard, as the guard is in charge of the train.

Passenger guards also accept heavy parcels and luggage boxes that passengers cannot carry in coaches. Some perishable goods like vegetables and milk are also transported under the guard's supervision, and he is responsible for their proper loading and unloading.

Keeping the passenger train on schedule is an important guard function. Guards carry a first aid box with their belongings, along with other important items, all in a medium-sized duty box (generally painted red). The name, designation and base location of the Guard are printed in white on the box. A designated passenger train, halting at all stations, carries a large heavy cast iron cash safe in the guard's brake van, where cash receipts from ticket sales is deposited in a leather pouch by the station manager (earlier called the station master). Since the late 1990s, all guards are provided with two-way radios so that they can communicate with the locomotive pilot, and other trains if required. The radio has not yet replaced the traditional red and green flags.

Conductor Rail Railway Electrification Stock Photo 732653881 ...

src: image.shutterstock.com

Tram (streetcar) conductor

Many antique or heritage trams (streetcars), which operated through the earlier part of the 20th century, were designed for operation by a crew of two or more. The conductor primarily collected fares and signaled the driver when safe to depart from stopping places. The conductor also assisted with shunting when necessary, changing the trolley pole and attended to passengers' needs.

Modern vehicle design and ticketing arrangements have largely eliminated the need for conductors on street railways and Light Rail systems. In recent years a number of modern tram or Light Rail systems have introduced (or re-introduced) conductors to minimise fare evasion and to provide customer care, supervision and security functions, even in situations where a second crew member is not strictly needed.

In Britain, The Midland Metro and Sheffield Supertram modern Light Rail systems have both started using conductors due to problems with ticket machine reliability. Nottingham Express Transit started with conductors. Manchester Metrolink and Croydon Tramlink both rely on ticket machines at stops.

Systems of ticket checking and selling by a conductor:

takes place while entering, the vehicle cannot leave until this is (almost) finished
takes place after entering an entrance lobby, while the vehicle already moves, after which the passenger moves to the seating area of the car
the passengers get seated and the conductor comes to them

Modern mass transit systems which operate with conductors on trams include:-

Conductor rail supports for underground & suburban railways

src: www.rehau.com

Footnotes

Composite conductor rails for underground & suburban railways

src: www.rehau.com

Conductor (rail)

Senin, 05 Februari 2018

Conductor (rail)

Video Conductor (rail)